Changing The Language Setting - Sony Handycam HDR-GW77V Operating Manual

You can change the on-screen displays to show messages in a specified language.
Select _ ---+ [Setup] ---+ [4_ General Settings] ---+ [Language Setting] ---+a desired language.
To turn offthe power
Close the LCD screen.
To adjust the angle of the LCD panel
First open the LCD panel 90 degrees to the
camcorder (@), and then adjust the angle
(®).
@ 270 degrees (max.)
(!) 90 degrees to the camcorder
0_
5 ¸
_D
To turn offthe beep sound
Select_---+ [Setup]---+[_a_GeneralSettings]
---+
[Beep]
---+ [Off].
• The recording date and time are recorded automatically on the recording media. They are not displayed
during recording. However, you can check them as [Data Code] during playback. To display them, select
--+ [Setup] --+ [ [] Playback Settings] --+ [Data Code] --+ [Date/Time].
• Once the clock is set, the clock time is automatically adjusted with [Auto Clock ADI ] and [Auto Area
ADJ] set to [On]. The clock may not be adjusted to the correct time automatically, depending on the
country/region selected for your camcorder. In this case, set [Auto Clock ADJ ] and [Auto Area ADJ] to
[Off] (HDR GW77V) (p. 49).
(W
• To set the date and time again: [Date & Time Setting] (p. 49)
_3