Changing Paper - Epson DFX-900 User Manual

Changing Paper

Follow the steps here when you need to change the paper loaded on the front or
rear tractor.
1. To tear off any printed pages or excess paper, press the
tear off the pages at the perforation.
Caution:
c
Always tear off the printed document and any excess paper before
changing paper. If the perforation does not align with the tear-off edge,
you can adjust it. See "Adjusting the Tear-Off Position" in your
on-screen Reference Guide.
To safely remove labels, continuous forms with labels, or overlapping
multi-part forms before changing paper, tear off the fresh supply below
the tractor and press
LF/FF Load
2. Press the button to switch to the other tractor. The selected
Front/Rear
paper advances to the top-of-form position.
button and
Tear Off
to eject the remaining labels or forms.
3. Open the front cover or the back cover and the back flap.
4. Open the sprocket covers and remove the paper from the tractor.
sprocket cover
5. Load the new paper. See "Loading Paper On the Front Tractor" on page 9
or "Loading Paper On the Rear Tractor" on page 12 for instructions.
Changing Paper 15