Installing And Using The Remote Configuration Manager - Epson DFX-900 User Manual

Installing and Using the Remote Configuration
Manager
The Epson Remote Configuration Manager provides an easy way to change your
printer's default settings in Windows. Follow these steps to install it:
1. Select
Install EPSON Remote Configuration Manager
screen and click .
2. When you see the InstallShield window, click
3. Click and follow the on-screen instructions.
Next
4. When the installation is complete, click
window on your screen to see the final installation screen.)
To start the program, select
Programs
Configuration Mgr > Epson Remote Configuration Manager
To open the program's on-screen User's Guide, select
)
Programs > Epson Remote Configuration Mgr > Epson Remote Configuration
.
Manager User's Guide
Note:
If you are using the serial port, you need to switch the printer driver to COM2 before
you run the Remote Configuration Manager. Switch it back to COM1 when you're
done.

8 Installing and Using the Remote Configuration Manager

on the Installation
. You see this screen:
Yes
. (You may need to close a
Finish
(or )
All Programs > Epson Remote
.
(or
Programs All