Audio; General - Sony FD Trinitron WEGA KV-34HS420 Operating Instructions Manual

Fd trinitron
Hide thumbs Also See for FD Trinitron WEGA KV-34HS420:
Table of Contents

Advertisement

Audio
Good picture,
F_
Press MUTINGso that the word Muting disappears
from the screen (see page
no sound
35).
F_
Make sure the Speaker option
is set to On in the Audio Menu (see page 49).
Cannot gain enough
volume
F_
Increase the volume
of the cable box using the cable box's remote control
when using a cable box
Then press TV FUNCTION and ad ust the TV's volume.
i
.............................................
Sound seems weak or
F_
The TV's audio might be set to Auto SAPor M0n0, when it might be better set
insufficient
to Stereo. In the Audio Menu (see page 48), set the MTSsetting to Stereo. If
already
set to Stereo, switch to M0n0 (which may reduce background
noise
during weak stereo broadcasts).
Cannot raise the volume on
F_
If the Speaker option is set to Off and the Audio Out option is set to Fixed (in
external audio speakers
order to output
the sound to }Tour audio system)
use your audio receiver to
adiust the sound (see page 48). Or, to use the TV remote control, set the
Audio Out option to Variable.
F_
To turn on the TV speakers,
set the Speaker option
to On (see page 48).
General
How to reset TV to
F_
Turn on the T_Z While holding
down the RESETbutton
on the remote
factory settings
control, press the POWERbutton
on the TV. (The TV will turn itself off, then
.....................................................
back 0n aga!n.) Release tl_e RESETbutton
.....................................................................
How to restore Video settings _1
Press the RESETbutton on the remote control while in the Video Menu (see
to factory settings
.......
page 46) ...............................................................................................
How to restore Audio
F_
Press the RESET button
on the remote control while in the Audio Menu (see
settings
to factory settings
page 48).
Cannot cycle through
the
F_
Be sure the Video Labeloption
is not set to Skip (see page 59).
other video equipment
connected
to the TV
which the menu option is not available.
Lost password
_
In the password
screen
(see
page 54), enter the following
master password:
4357, The master password
clears your previous
password;
it cannot
be
.......
used to temporarily
unblock channels.
.......
TV makes "popping"
sound
F_
This is a normal
sound that results from the TV automatically
degaussing
when turned
on
each time it is turned on.
LED on front panel is lit
F_
This LED (see page 10) blinks when the TV is turned
on, then shuts off
when the picture is displayed.
If the LED blinks continuously,
this may
indicate
the TV needs service. When the timer is set, this LED will remain
lit even when the TV is turned
off.
work
described
on pages 18-19, you must use a special bi-directional
splitter that
is designed
to work with }Tour digital cable box. Contact }Tour cable
provider
for details.
65

Advertisement

Table of Contents
loading

Table of Contents