Using Antenna
in WEGA GATE
The Antenna
feature takes you to the most recently
viewed channel on the
antenna input.
When tuned to the channel, the Program
Banner
and Channel
number
will be displayed.
Select Antenna
from the WEGA
GATE control panel and press @.
_
If you have not completed the initial channel setup (see page 64) both
Cableand Antennawill tune to the lowest channel number. To run Auto
Program see page 64.
Using External Inputs in WEGA GATE
The External
Inputs feature lets you view from a selected external input
connected to your TV. You can assign a label or skip over unused inputs by
selecting Edit Video Labels. Input label assignment can also be done by
going to Setup settings and select Label Video Inputs (see page 70).
1
Select External
Inputs fiom the WEGA GATE control panel and press
Tile External
Inputs list appears.
Make your selection.
2
Press _/_, to highlight
the desired
external input and press @.
_iiiiiiiiii_iiliiiiiiiiiiiiiiiii_
_llllllllllllllllllllllllllllll_
Using Settings in WEGA GATE
The Settings feature lets you enter to the menu screen where most of
advanced settings and adjustments are performed (see page 56).
55