Cable Box And Antenna - Sony Grand WEGA KDF-E55A20 Operating Instructions Manual

Cable Box and
Antenna
Before connecting a
cable bo_ see "Using
CableCARD Device" on
page 25.
Your cable company scrambles some channels, such as premium
channels (which requires you to use a cable box), but does not scramble
all channels.
You do not have a VCR. (If you have a VCR, see pages 32 and 33.)
Use the TV's remote control to change channels coming through the
cable box to the TV's cable input. (You must first program the remote
control for your specific cable box; see "Programming the Remote
Control" on page
44.)
Use the TV's remote control to change channels coming directly into
the TV's VHIF/UHF input jack.
CATV cable
cable VHF/UHF ¢_ble
Use the cable box Tune the TV to the channel the cable box is set to (usually channel 3
or 4) and then use the cable box to switch channels.
Set up the TV remote control to operate the cable Prograln the remote control. See "Programming the Remote
box Control" on page 44.
Activate the remote control to operate the cable Press once, and the
box indicator lights up.
Prevent the accidental switching of TV channels When using the cable box, ensure that the TV remains tuned to the
channel that the cable box is set to (usually channel 3 or 4).
Switch the TV's input between the cable box and Press to switch back and forth between the TV's VHF/UHF
antenna (scrambled chalmels) and CABLE (unscrambled) inputs.
21