The Date And Time - Sony handycam CCD-TR91 Operating Manual

You need to set the carncorder's date and time to record the colrect ones onto your video. Before setting
the clock, make sure a power source and lithium battery are installed.
(1) While pressing the small green button on the POWER switch, slide it to CAMERA. (2) Turn STANDBY
up. (3) Move the viewfinder lens adjustment lever so that the "STBY" indicator in the viewfinder comes
into sharp focus. (4) Press DATE (+) and TiME (NEXT) simultaneously for 3 seconds. (5) Adjust the digits
of the year, month, day, hour and minutes by pressing DATE (+) and TIME (NEXT). To set the year to
1993, there is no need to press DATE (+) in 5-0. Note that when you keep DATE (+) pressed, the digits
advance faster.
iiiii i i
1
iiiiiiii i
4
ii
I_ OFF
i
TIME(_..._
r
i
DATE(+) TIME(NEXT)
DATE(+) TIME(NEXT)
DATE(+) TIME(NEXT}
DATE(+) TIME(NEXT)
i_ D(_) TIME(NE_
[ ÷"- l÷
To Correct the Date and Time Settings
Press TIME (NEXT) repeatedly until the minute digits stop flashing. Then repeat steps 4 and 5.
To Check the Preset Date and Time
Press DATE (+) to display the date indicator in the viewfinder and the display window.
Press TIME (NEXT) to display the time indicator. When you press the same button again, the indicator
goes off.
12