Sylvania CD130SL8 Owner's Manual page 30

Adjust t he blacklevelto make thedarkareasof theTVpicturebrighter.
1 During playback, press [MODE] repeatedly until
"_" appears.
MODE
Youcan enjoyvirtual surroundon yourexisting 2 channelstereosystem.
1 During playback, press [MODE] repeatedly until
"_" appears.
MODE
2 Use [Cursor A/V] to adjust the black level.
or
ON : Makes the dark areas brighter.
OFF : Shows the original picture as recorded.
3 Press [RETURN] to exit.
RETURN
Note:
1
• The settin9 will be kept even if the unit is turned off. I
Use [Cursor A/V] to select the sound level.
i
1 : Natural effect
2 : Emphasized effect
OFF : No effects (original sound)
Press [RETURN] to exit.
RETURN
Note:
• The setting will be kept even if the unit is turned off.
• For audio CD, virtual surround will not be effective if the
sound mode is set to something other than "STEREO'_
See"Stereo Sound Mode';
• Turn down the level or select "OFF" if the sound is distorted.
Thisunitallowsyou to select a sound modeduring audio CDplayback.
1 During playback, press [MODE] repeatedly until
" "a p pea rs.
MODE
Use [Cursor A/V] repeatedly until the desired sound
mode appears.
J
• Each time you press [MODE], the audio language
changes as example below.
F__ STEREO (mixed s°und °f left and rig ht channels)
L-ch (left channel sound only)
I--_ R-ch (right channel sound only)
Note: 1
• Virtual surround cannot be changed when the sound mode isI
set to either "L-oh"or "R-ch'_
j
EN