Closed Caption - Sylvania CD130SL8 Owner's Manual

%J
i C',
[] Closed Caption
Youcanview closed captioning (co) f or TVprograms, m ovies andnews.
Closed captionreferto textof dialogue or descriptions displayed on-screen
for the hearingimpaired.
1 Press [SET-UP] to displaythe main menu.
SET-UP
2 Use [CursorA/Y] to select"CAPTION", then press
[ENTER] repeatedly to change the setting.
e.g.) digital TV mode
- W SETUP -
CHANNELSETUP
V-CHIP SETUP
LANGUAGE [ENGLISH]
_" CAPTION [OFF]
DTVSETUP
l
[OFF]
!
[CAPTION1 ]
I
[CAPTION2]
!
[TEXT1]
I
[TEXT2]
CAPTION1 and TEXT1;
are the primary caption and text services.
The captioning or text is displayed in the same
language as the program's dialogue
(up to 4 lines of script on the TV screen, where it does
not obstruct relevant parts of the picture).
CAPTION2 and TEXT2;
are rarely available and broadcasters use them
only in special conditions, such as when "CAPTION 1"
or "TEXT1" is not available.
• There are 3 display modes according to programs:
Paint-on mode: Displays input characters on theTV
screen immediately.
Pop-on mode: Once characters are stored in memo-
ry, they are displayed all at once.
Roll-up mode" Displays the characters continuously
by scrolling (max. 4 lines).
No re:
• Toshow the closed caption on your TVscreen, broadcast
signal must contain the dosed caption data.
• Not all TVprograms and commercials have the closed cap-
tion or all types of the dosed caption.
• Captions and texts may not match the TV voice exactly.
• Changing channels may delay the dosed caption for a few
seconds.
• Adjusting or muting the volume may delay the dosed cap-
tion for a few seconds.
• Abbreviations, symbols and other grammatical shortcuts
may be used in order to keep pace with the on-screen
action. This is not o problem with the unit.
• Thecaption or text characters will not be displayed while
the main menu or functions display is shown.
• Ifa black box appears on the TVscreen, this means that the
dosed caption is set to TEXTmode. Toclear the box, select
"CAPTION 1","CAPTION2"or "OFF".
• If the unit receivespoor quality television signals, the cap-
tions may contain errors, or there might be no captions at
all. Some possible causes of poor quality signals are:
- Automobile ignition noise
- Electric motor noise
- Weaksignal reception
- Multiplex signal reception (ghosts or screen flutter)
• Theunit retains the dosed caption setting if the power fails.
Press [SET-UP] to exit,
SET-UP
i -i:i
i !!ii:
ZI:I
i_:!i:i!i
iZ_:i
EN