Precautions - Sylvania 6520FDG Owner's Manual

You canconnect thisunit t oa digital audio device t oenjoy thedigital audio ofDVD. Connect toanamplifier
equipped withdigital input jacks, such asMDdeck or DAT deck. Toplay a DVD discina Dolby Digital Multi-
channel surround format inthisunit, c onnect toa Dolby D igital decoder.
Use anaudio coaxial digital cable (commercially available) fortheaudio connections.
Dolby Digital fi
q
decoder To Coaxial digital
...... ,o oi ,N)Audioinputjack
_, Audio coaxial
digital cable
(commercially
available)
ex.
MD deck,
DAT deck, etc. F_
. To Coaxial digital
_L _ _1_ (IN)
NOTES:
. The audio source on a disc in a Do/by Digital Multi-channel surround format cannot be recorded as digital sound by an
MD or DAT deck.
. Be sure to turn off the power to all devices in the system before connecting another device.
. Refer to the Owner's Manuals for the devices to be connected to the unit.
. To connect to a MD or DATdeek, set "DOLBY DIGITAL" to "PCM" for the audio output in the setup mode, and to con-
nect to a Do/by Digital decoder, set to "BITSTREAM". (Refer to "AUDIO SETTING" on page 22.) Playing a unit using
incorrect settings may generate noise distortion and may also damage the speakers.
LU
e3
t_
0
LL
z
o
t_
uJ
¢r
a.
1) Open the battery compartment cover by pressing
the cover on the remote unit in the direction of
the arrow.
2) Insert 2 "AA" penlight batteries into the battery
compartment in the direction indicated by the
polarity (+/-) markings.
3) Replace the cover.
[BATTERY PRECAUTIONS]
,, Be sure to follow the correct polarity as indicat-
ed in the battery compartment. Reversed batter-
ies may cause damage to the device.
,, Do not mix different types of batteries together
(e.g. Alkaline and Carbon-Zinc) or old batteries
with fresh ones.
,, If the device is not to be used for a long period
of time, remove the batteries to prevent damage
or injury from possible battery leakage.
,, Do not try to recharge batteries not intended to
be recharged; they can overheat and rupture.
EN