Table of Contents
Advertisement
SPECIAL PLAYBACK FUNCTIONS & SETTINGS
You can adjust the Black Level to make the
black parts of the picture brighter.
1 During playback, press
[MODE] repeatedly until
BLACK LEVEL menu
appears.
2 Use [,& / Y] to select "ON" or "OFF".
,, ON: Makes the dark parts brighter.
OFF: Shows the original picture as recorded.
(Initial setting)
3
Press [RETURN] to exit the menu.
NOTE:
, The setting will be saved even if the unit is turned off.
You can enjoy surround-sound
effect
_
IL_
over two speakers on this unit.
1 During playback, press
[MODE] repeatedly until
V.S.S menu appears.
2 Use [A / T]
to select the desired sound effect.
,, 1:
Natural effect
2:
Emphasized effect
OFF: No effect (Initial setting)
3
Press
[RETURN]
to exit the menu.
NOTES:
. When playing back 96kHz with Virtual Surround func-
tion, the sound will be down sampled at 48kHz and
output as digital audio.
(for CD play
only)
. Virtual Surround System will be effective only when
you set the sound mode to "STEREO". (Refer to
"STEREO SOUND MODE" on page 17.)
You can begin playback at a specific track, title,
chapter or from a specific point on a disc.
TRACK
SEARCH
[G_,J_
I Duringplayback, press[MODE] f,;_::
Z: ;_Z_;_;,
....................
]'
repeatedly until SEARCH
Y
menu appears.
2
Within 60 seconds, use the Number buttons
to
select the desired track number. Playback will
start from the selected track.
NOTES:
* For single digit press [0] first, if the tote/track of the
disc is 10 tracks or more.
* You can also skip tracks by using [SKIP _
/ I=_H],
or entering the desired track number with
the Number buttons.
3
Press [RETURN] to exit the menu.
CHAPTER
SEARCH
1 During playback, press
[MODE] repeatedly until
SEARCH menu appears.
2
Use the Number buttons
to enter the desired
chapter number. Playback will start at the selected
chapter.
, Press [CLEAR]
to erase the incorrect input.
For single digit press [0] first, if the total number of
chapters of the disc is 10 or more.
3
Press
[RETURN]
to exit the menu.
NOTE:
, You can also skip chapters by using [SKIP _
/ _'-_,.I],
or entering the desired chapter number with
the Number buttons.
TITLE
SEARCH
1 During playback, press [MODE] repeatedly until
SEARCH menu appears.
2
Use [A / Y] to display
TITLE SEARCH menu.
3
Use the Number buttons
to enter the desired title
number. Playback will start at the selected title.
Press [CLEAR]
to erase the incorrect input.
For single digit press [0] first, if the total number of
titles of the disc is 10 or more.
4 Press [RETURN] to exit the menu.
EN
Advertisement
Table of Contents
