Sylvania CT202SL8 Owner's Manual page 40

This feature allows you t oassign aspecific point on adisc tobe called back
later.
To set a marker
During playback, press [MODE] repeatedly until
" / "appears.
e.g.) DVD
MODE
2 Use [Cursor A/V] repeatedly until maker search menu
appears.
e.g_) DVD
O_
0,_ Use [Cursor _1 / I1_] to select an available marker
within 60 seconds.
e.g.) DVD
_ When the playback reaches the point at which you
want to set a marker, press [ENTER]_
. Marker is now set.
e.g.) DVD
_, Press [RETURN] to exit.
RETURN
To return to the marker later
_ To select a desired marker, repeat steps 1-3 in
"To set a marker" above.
e.g.) DVD
_i Press [ENTER] at the desired marker to start playback
from the specific point which you set.
e.g.) DVD
Note:
. Maker search menu will disappear in about 60 seconds when
there is no input.
. You can mark up to 10points.
. To clear o marker, select the marker to be deored, and then
press [CLEAR].
. Ejecting the disc or turning off the power will eraseall mark-
ers.
. 5electing "; ;::"ot step 3 in the section "To set a marker"
will also erase all markers.
EN