About Overlapped Programs; Timerrecording Extension - Sylvania CT202SL8 Owner's Manual

_ Press [ENTER] tocomplete setting.
_OPress [POWEROI to set the timer recording.
POWER
[]Timer Recording Extension
Youcan shift the time scheduleof the timer recordingafter programming
or during recording.
Press [POWER(b] to turn on the unit.
POWER
• The recording indicator lights up.
'_' At the programmed start time, the unit begins record-
ing.
Note:
. Ifyou hove not yet set the clock, "MANUALCLOCKSET"
menu appears. Set to the present time and date (refer to
"Manual Clock Setting" on page 12)then start setting the
timer recording.
. Youmust turn offthe unit to activate the timer recording.
. If power is not turned offandyou continue watching TV,
"TIMERRECSTANDBY" starts flashing on the TVscreen 2
minutes before the programmed start time.
. Make sure o cassette tape with erase-prevention tab is
inserted before turning off the unit. If the cassette tape
does not have the tab, it will be ejected when you press
[POWERO] to turn off.
. The recording starts without turning on the TVscreen.
°During recording, you con watch only currently being
recorded TV program or DVD playback.
Press[POWERO ] and [SELECT] to select the desired mode.
. If the cassette tape runs out before the end time, the record-
ing stops immediately and the cassette tope will be ejected.
To confirm, correct or cancel the timer program
1 Press [POWERO] to turn on the unit.
(The recording indicator lights off.)
2 Repeat steps 1 to 3 in "Timer Recording".
3 Confirm the details of programs that appear on the
TV screen. Use [Cursor A / y] to select the program
you want to correct, then press [ENTER].
Use [Cursor A / y / I_] to correct the desired item,
then press [ENTER].
4 If you want to cancel the desired program, press
[CLEAR] at the program position you want to delete.
Or, press [STOP/EJECT m ___]on the unit to stop
recording if the timer recording is in progress.
5 Press [SET-UP] to exit.
[] About Overlapped Programs
When programsare overlapped,some programwill not berecorded.
. The program with an earlier start has priority.
• Once the earliest program finishes, the overlapping
programs will begin recording in sequence.
. When the starting time is the same, the program set
on the highest position in the program list has priority.
. The illustration below demonstrates the sequence of
recordings.
•recording period is shaded
_ Press [SET-UP] to display the main menu.
SET-UP
3 Use [Cursor A IV] to select"TIMER PROGRAMMING",
then press [ENTER].
e.g.) digital TV mode
TVNCR SETUP
I_ TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SETUP
USER'S SETUP
V-CHIP SETUP
LANGUAGE ENGLISH]
CAPTION [O_F]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
DTV SETUP
_, Press [REC] and use [Cursor A / V] to select the
desired program.
REC
_, Press [REC] repeatedly until your desired begin/end
time appears, then press [ENTER].
REC - TIMER PROGRAMMING --
. Every time you press [REC], the begin/end time will
shift increase by 10 minutes.
_ Press [SET-UP] to exit.
SET-UP
io
Note:
• When the recording is already in progress, each press will
shift forward the end time only.
• Ifyou want to cancel while setting, press [PAUSE I |] on the
remote control. The recording time returns to the original time.
• When you shift forward the time schedule during recording,
the recording speed will be automatically set to the SLP mode.
i iT,ili
i i_ i_ i_
i;b
i li,ii_
i iii!_:i_i
i%!;
i iiiii_!!_ '
U;i
iiii
i3:
i!!ii,?_
ii%_i
t
[
iiii
_G
i ;ii!
i i!_iiii_i
iiii!_iiii
prog 2 9:00am 10:00am
prog 3 9:30am 12:00pm i
9:00am 10:00am 11:00am 12:00pm
EN