Table of Contents
Advertisement
Handset Operation
NOTE: If HSX is out of range, or on an external call,
when HS1 attempts to intercom it, the display of
HS1 will show:
Call Forward
If you have registered accessory handsets (model mi 6820) to your base, you can
forward calls between system handsets. An external call can be forwarded from one
handset (HS1) to any other handset.
•
A handset (HS1), on an external call can for-
ward it to any other handset .
•
Press the INT key on HS1, it will display:
•
Enter the handset number you wish to for-
ward to. HS1 will display:
•
HS2 can press PHONE to answer the call.
NOTE: If HS2 does not respond in about one minute
the external call will be returned to HS1 and the
display will show:
If the returned call is not answered within one
minute, the external call will end automatically.
Conference Call
If you have registered accessory handsets
(model mi 6820) to your mi 6821 base, you can
have conference calls between system handsets.
It is possible to establish a conference between
any two handsets and the external line.
If a handset already has a connection to the ex-
ternal line, and any other handset goes off-hook,
a conference is immediately established. Both
handsets will show:
Base Operation
From the base unit, press PAGE to locate the
handsets.
•
When the handset is in idle, press PAGE. The
handsets will beep and display:
•
To end the page, press PHONE, SPK, or any
dial pad key (0-9, *, #) at the handset, or press
PAGE at the base.
13
Advertisement
Chapters
Table of Contents
