20. Wrap the High Cable (45) around a 9Omm Pulley
(38). Attach the Pulley inside the Top Frame (8)
with an M10 x 70mm Bolt (58), two M1OWashers
(26), two 13mm Spacers (34), and an M10 Nylon
Locknut (71).
21. Attach the eyelet end of the High Cable (45) to
the M10 x 20mm Bolt (67) in the bracket on the
Weight Carriage (14) with an M1O Nylon Locknut
(71).
22. Locate the Low Cable (47). Route the Cable
through the cage and rest it in the brackets on the
Center Base (2).
Attach a 90mm Pulley (38) inside the indicated
bracket on the Center Base (2) with an M10 x
47mm Bolt (61) and an M10 Nylon Locknut(71).
23. Attach a 90mm Pulley (38) inside the indicated
bracket on the Center Base (2) with an M10 x
47mm Bolt (61) and an M10 Nylon Locknut(71).
2O
21
38
145
34
26
61
Cage
23
38
61 e,;1
11