Using The Lan Mac Eeprom Utility - Acer Aspire V3-471 Service Manual

Using the LAN MAC EEPROM Utility

Perform the following steps to write MAC (Media Access Control) information to
EEPROM:
LAN.BAT
Use
1. Get into a MS-DOS prompt and enter
is the 16 digit number given as Physical Address ).
LAN.BAT
2. Run the
3. Enter the 'MAC address' to write MAC values. Flash process begins as shown as
follow:
Enter the MAC ID - Samle: 001636XXXXXX(_________):
Please waiting for EEPROM data filling .........
Please waiting for EEPROM data comparing .........
.........
Current MAC ID of ESN EEPROM : 001636558899
Compare ACER & OEM S/N of ESN EEPROM : PASS
4. Flash is completed when the message, Compare ACER & OEM S/N of ESN EEPROM:
PASS, is shown.
5. At the command prompt, run
EEPROM.
6. Reboot the system when the process has completed.
2-28
utility to write MAC values to EEPROM under DOS mode.
file.
VEEPROM.EXE
0
ipconfig /all
to get 'MAC address' (MAC address
to write any changes in the data to the
001636558899
System Utilities