+
IMPORTANT:
Circuit boards >10 cm² have been highlighted with a yellow rectangle as
shown in
regulations for disposal.
Mainboard Installation
1. Place the mainboard onto the base assembly. Refer to
2. Install and secure two (2) screws (B) to mainboard. Refer to
3. Connect DC-in cable to mainboard connector (D)
4. Connect LVDS cable to mainboard connector (C)
5. Connect the speaker cable to mainboard connector (A) on the backside of the
mainboard
(Figure
6. Install Keyboard Module.
ID
Size
B
M2.5*6
Machine Maintenance Procedures
Figure
3-26. Remove the circuit board and follow local
3-23).
Quantity
Figure
Figure
(Figure
3-24).
(Figure
3-24).
2
3-25.
3-24.
Screw Type
3-27
0