Using the LAN MAC EEPROM Utility
You can use the MAC.BAT utility to write the MAC.CFG file to the EEPROM in DOS mode.
1.
Use a text editor to open the MAC.CFG file. You can see the MAC.CFG contents as shown:
2.
In DOS mode, run the MAC.BAT file to write MAC values to eeprom.
Chapter 2
Downloaded from
www.Manualslib.com
WriteData = '001122334455'
StartAddr=7A
WriteLeng=6
KeepByte=0
manuals search engine
MAC value
MAC address
MAC value length
don't care
39