Using The Control Panel; Flash - Casio Exilim EX-FH100 User Manual

J,
The control panel can be used to configure camera settings.
1. In the REC mode, press [SET].
[A] ET] E_] E_]
[SET]
.
Use [A] and [V] to select the setting you want to change.
This will select one of the control panel icons and display its settings. _4
@Image size/Quality _-2(pages 36, 105)
@ISO sensitivity (page 41 )
@White balance (page 42)
@EV shift (page 43)
@Not displayed in this mode
@Not displayed in this mode
@Not displayed in this mode
@Flash (page 44)
@Date/Time (page 46)
_] Items displayed in the control panel depend on the recording mode.
_2 Image quality cannot be changed using the control panel.
Control panel
3. Use [,]
and [,] to change the setting.
4.
If you want to configure another setting, repeat steps 2 and 3.
5. After all of the settings are the way you want, press [SET].
This will apply the settings and return to the REC mode.
_NOTE
• You also can use on-screen menus to configure settings other than those listed
above (page 89).
35 Snapshot Tutorial