Casio Exilim EX-FH100 User Manual page 19

The first time you load a battery into the camera, a screen appears for configuring the
display language, date, and time settings. Failure to set the date and time correctly
will cause the wrong date and time data to be recorded with images.
• A screen for language selection will not appear in step 2 of the procedure below if
you purchased a camera intended for the Japanese market. To change the display
language from Japanese in this case, use the procedure under "Specifying the
Display Language (Language)" (page 166). Note that a version of this manual in
the language you select may not be included with a camera intended for the
Japanese market.
• Camera models sold in certain geographic areas may not support display language
selection.
/. Press [ON/OFF] to turn on the [ON/OFF]
camera.
.
.
Use [A], [V], [<], and [_.] to select
the language you want and then
press [SET].
Use [A] and [Y] to select a date style and then press [SET].
Example: July 10, 2012
YY/MM/DD --* 12/7/10
DD/MM/YY --* 10/7/12
MM/DD/YY --* 7/10/12
4.
Set the date and the time.
Use [<] and [1_] to select the setting you want to
change and then use [A] and [V] to change it.
To switch between 12-hour and 24-hour format, slide
the zoom controller.
5. After setting the date and time, use [<] and [,]
to select "Apply" and then press [SET].
19
Quick Start Basics