Casio Exilim EX-FH100 User Manual page 59

rl_l_[_l_[_ _ iiiiiiiiii,
The following procedure explains how to record a standard (STD) movie.
See the pages indicated below for more information about movies.
High-definition movie (HD movie): page 62
High speed movie (HS movie): page 62
[O] (Movie)
Movie mode
switch
1.
Set the mode dial to [] (Auto).
2. In the REC mode, set the movie
mode switch to =(_) (HD/STD).
3. Press [MENU].
4. Use [,]
and [_.] to select the "Quality" tab.
5. Use [A] and [V] to select "L_J Quality" and then press [,].
6.
Use [A] and [V] to select "STD" (Standard),
and then press [SET].
• Recording is performed with an aspect ratio of
4:3, an image size of 640X480 pixels, and a
frame rate of 30 frames per second (STD Movie).
Image size setting cannot be changed.
• The semi-transparent gray frame on the monitor
screen indicates the area that is recorded when
shooting a movie. The area within the frame is
recorded for a movie.
Semi-transparent gray
frame
.
.
Press [O] (Movie).
This will start recording and display _ on the
monitor screen.
Movie recording includes stereo audio.
Press [O] again to stop recording.
Movie recording also will stop automatically if
memory becomes full before you press [O].
• The maximum size allowed for a single movie file
is 4GB. Movie recording stops automatically
when a file becomes 4GB.
Remaining recording time
(page 195)
Recording time
59
Recording Movies