Casio Exilim EX-FH100 User Manual page 81

You can use these features to shoot an image automatically whenever the subject
moves into or moves out of a frame on the monitor screen. You also can configure the
camera to record images of what happened immediately before and after the subject
moves.
Automatically records what happened immediately before and
after the subject moves outside of a boundary on the monitor
screen.
Automatically records what happened immediately before and
after the subject moves into a boundary on the monitor screen.
• To setup the camera
1.
In the REC mode, set the mode dial to 17_J.
2. Press [SET].
3. Select "Move Out CS" or "Move In CS" and then press [SET].
4. Use [V] to select the fifth control panel option from the top
(boundary location), and then press [SET].
5. Configure the boundary location and size
settings.
Moves the boundary.
Resizes the boundary.
6. Press [SET].
7.
Press [V].
8. Use [A] and [V] to select the fourth control panel option from the
bottom (High Speed CS fps).
Boundary
81 Using BEST SHOT