Snapshot Tutorial; Using The Control Panel - Casio ExilimEX-Z280 User Manual

Snapshot Tutorial

Using the Control Panel

The Control Panel can be used to configure camera settings.
1.
In the REC mode, press [SET].
This will select one of the Control Panel icons and display
its settings.
2.
Use [8] and [2] to select the setting you want to change.
Image size/Quality* (pages 30, 79)
1
Flash (page 33)
2
AF Area (page 35)
3
ISO sensitivity (page 36)
4
Continuous shutter (page 37)
5
Face Detection (page 40)
6
Make-up (page 42)
7
easy Mode (page 43)
8
Date/Time (page 45)
9
* Snapshot image quality cannot be changed using the Control Panel.
3.
Use [4] and [6] to change the setting.
4.
If you want to configure another setting, repeat steps 2 and 3.
5.
After all of the settings are the way you want, press [SET].
This will apply the settings and return to the REC mode.
NOTE
• You can configure the camera to turn off display of the Control Panel when you
press [SET] (page 140).
• You also can configure settings other than those listed above (page 62).
• The Control Panel cannot be displayed while a Dynamic Photo, Prerecord Movie,
For YouTube, or Voice Recording Operation is in progress.
Downloaded From camera-usermanual.com Casio Manuals
Available settings
29
[8] [2] [4] [6]
[SET]
Control Panel
1
2
3
4
5
6
7
8
9
Snapshot Tutorial