E-mail
This section provides you with all the information you need to get setup for sending
and receiving e-mail.
Selecting a Mobile Phone Configuration
Your PV Unit connects to an access point of your e-mail service provider
through a mobile phone equipped with a modem. You must specify a
configuration for your mobile phone so your PV Unit knows how to "talk"
with it. You can select one of three preset mobile phone configurations. If
your phone does not work with the preset configurations, you can create
your own configuration using AT commands.
To select a preset mobile phone configuration
1. On the initial screen that appears when you first enter the Mail Mode,
tap the Phone button to display the Phone tab.
2. Tap the button next to the name of the manufacturer (Ericsson, Nokia,
Siemens) of the type of mobile phone you are using.
3. Tap Set to apply your selection.
92