Casio PV-750 Plus User Manual page 139

Notes
• The above procedures can be used to send or receive all data in specific
modes only. You cannot send or receive individual data items.
• Data communication can be interrupted at any time by pressing Esc.
This causes the message Stopped! to appear on the displays of both
units.
The message Communication error! appears on the displays of both
•
units whenever data communication is interrupted due to cable
disconnection, line noise, or other abnormal condition.
• If the secret memory area is accessed on a unit receiving data, the received
data is stored in the secret memory area, regardless of the memory area
the data is in on the sending unit.
• When you exchange data between the PV-750Plus and another model
PV Unit, the Phone Book (Phone) category corresponds to the Untitled
4 category of the other PV Unit, while the Phone Book (SIM) category
corresponds to the Untitled 5 category of the other PV Unit. The Free 2
fields of the Untitled 4 and Untitled 5 categories correspond respectively
to the Mobile fields of the Phone Book (Phone) and Phone Book (SIM)
categories of PV-750Plus Unit data. If a Free 2 field does not contain
any data, blank spaces are input into the corresponding Mobile field
when data is sent to the PV-750Plus Unit from another model PV Unit.
• Transferring data from the PV-750Plus to a PV-100 or PV-200 causes
all euro symbols to be replaced by spaces.
The size of the PV-750Plus screen is 160 × 160 dots. Transferring
•
PV-750Plus Quick-Memo data to a PV-100 or PV-200, which both have
98(V) × 124(H)-dot screens, causes the right side and bottom part of the
Quick-Memo image to be cut off in order to fit the PV-100/PV-200 screen.
Chapter 11 Data Communication
139