Casio FX-9750G PLUS User's Manual & Technical Reference page 433

• {SEL} ... {selects data item where cursor is located}
• {TRAN} ... {sends selected data items}
Use the f and c cursor keys to move the cursor to the data item you want to
select and press 1 (SEL) to select it. Currently selected data items are marked
with "'". Pressing 6 (TRAN) sends all the selected data items.
• To deselect a data item, move the cursor to it and press 1 (SEL) again.
Only items that contain data appear on the data item selection screen. If there are
too many data items to fit on a single screen, the list scrolls when you move the
cursor to the bottom line of the items on the screen.
The following types of data items can be sent.
Data Item
Program Program contents
n
Mat Matrix memory (A to Z) contents
n
List List memory (1 to 6) contents
n
File List file memory (1 to 6) contents
Graph expressions, graph write/
Y=Data non-write status, View Window
contents, zoom factors
n
G-Mem Graph memory (1 to 6) contents
n
V-Win View Window memory contents
n
Picture Picture (graph) memory (1 to 6) data
DynaMem Dynamic Graph functions
Equation Equation calculation coefficient values
Variable Variable assignments
F-Mem Function memory (1 to 6) contents
* No overwrite check: If the receiving unit already contains the same type of data, the
1
existing data is overwritten with the new data.
With overwrite check: If the receiving unit already contains the same type of data, a
message appears to ask if the existing data should be overwritten with the new data.
Performing a Data Transfer Operation
Contents
21 - 5
Overwrite Password
Check* Check*
1 2
Yes Yes
Yes
Yes
Yes
No
Yes
No
No
Yes
No
No
No
405