Introduction
At least 50MB of free hard disk space for storing images
(100MB or more is recommended)
VGA, Super VGA, or better display adapter and monitor
Double-speed CD-ROM drive (quad-speed or faster
recommended) for installing the printer software
Network connection to Ethernet
A twisted-pair (10BASE-T) or thin coaxial (10BASE2)
cable (with a 50 ohm terminator, if necessary) to connect
the printer's Ethernet card to your network.
Macintosh System Requirements
To use your printer and its software with a Macintosh, your
system should have:
Any Macintosh or Power Macintosh model except the
Macintosh +, Macintosh 512, Performa
®
PowerBook
100, and some early versions of the
Macintosh, such as the II or Classic
System 7.1 or later (7.5 or later recommended)
At least 16MB of RAM (20MB or more is recommended)
At least 50MB of free hard disk space for storing images
(100MB or more is recommended)
13-inch RGB display or better
Double-speed CD-ROM drive (quad-speed or faster
recommended) for installing the printer software
Network connection to Ethernet
A twisted-pair (10BASE-T) or thin coaxial (10BASE2)
cable (with a 50 ohm terminator, if necessary) to connect
the printer's Ethernet card to your network.
2
®
410,