Taking Pictures (Smart Auto) - Canon POWERSHOT SX150 IS User Manual

Taking Pictures (Smart Auto)
AF Frame
Focus.
Press the shutter button halfway to focus.
When the camera focuses, it will beep
twice and AF frames will appear where the
camera focused.
Several AF frames will appear when the
camera focuses on more than 1 point.
If [Raise the flash] appears on the screen,
raise the flash manually to use it. If you
manually lower the flash until it closes, it
will not fire.
shoot.
Press the shutter button fully to shoot.
The camera will play the shutter sound and
shoot. The flash will automatically fire in
low light conditions if it is raised.
The image will appear on the screen for
approximately 2 seconds.
You can take a second picture even while
an image is displayed by pressing the
shutter button again.
24