Auto Cont (Auto Continue); P-Config Save (Power-Up Configuration) - Epson 60 Operator's Manual

AUTO CONT (Auto Continue)

When you switch this feature ON, the printer will continue printing after a certain period
of time when one of the following error occurs: SET FULL PRINT, PAGE BUFFER
FULL, PAPER SIZE ERROR, TRAY SET xxx, INSUFF MEMORY
If this feature is OFF, you will have to press the
In most cases, leave this feature OFF. The warning on page 44 explains why.
1. Enter Level 2 mode (see page 34).
2. Press or
3. To change the current setting:
4. Press or
played.
5. Store the displayed setting:
6. twice to return to printer "Ready" mode.

P-CONFIG SAVE (Power-up Configuration)

Use this feature to save your Level 2 settings so that they will take effect each time you
switch your printer on.
1. Enter Level 2 mode (see page 34).
2. Press or
played.
3.
4. To save the current Level 2 settings:
5. twice to return to printer "Ready" mode.
Note: If you ever need to return the printer to the factory settings, see FACTORY RE -
SET (page 42).
until AUTO CONT. is displayed.
until the required setting is dis -
until P-CONFIG SAVE is dis -
ADJUSTING THE PRINTER SETTINGS
button to continue printing.
41