Load Macro - Epson 60 Operator's Manual

ADJUSTING THE PRINTER SETTINGS
4. Press or
played.
Example: Macro number 2.
5. Store the current settings as the displayed
macro number:
6.
7. twice to return to printer "Ready" mode.
Caution: Do not switch off the printer while it is saving a macro. If you do, you
may see START UP ERROR next time you turn the printer on.

- LOAD MACRO -

Use this feature to load one of the macros that you have already stored with the SAVE
MACRO feature.
Available Options: 0 to 4, If you select 0, all Level 1 settings return to their factory set -
tings.
1. Enter SYSTEM CONFIG mode (see page 29).
2. , then or
played.
3.
4. Press or
ber is displayed.
5. Load the macro:
6.
7. twice to return to printer "Ready" mode.
32
until the required number is dis -
(EXE: Execute)
until LOAD MACRO is dis -
until the required macro num -
(EXE: Execute)