Using Selectype Mode; The Display; Buttons - Epson 60 Operator's Manual

Using Selectype Mode

The Display

When you enter Selectype mode, menus and options appear on the display. The dis-
play shows feature names on the left side and optional settings for each feature on the
right side.
The display also uses the following icons.
If seen to the left of an option, this indicates that you can press
either
If seen to the left of an option, this indicates the current
setting of the feature. You can press either
options or features.
This icon indicates that you can press
select an option, set an option, or execute an action.

Buttons

- Entering Selectype Mode -
Use this to enter Selectype mode from printer "Ready" mode.
To enter Level 1, press the button until "SELECTYPE LEVEL 1"
appears on the display, then release it immediately.
To enter Level 2, hold the button down longer, until
"SELECTYPE LEVEL 2" appears on the display.
- Within Selectype Mode -
Use the arrow buttons to move through menus and to select, display, set, or execute
Selectype options.
Use this to enter a submenu, set an option, or select or execute an action.
Use this at any time to return through the menu levels to the main menu or to get out of
Selectype mode.
Use these buttons to scroll through the available choices. Either press the button once
to view the options one at a time, or hold the button down to scroll quickly through the
options.
or to view other options or features.
ADJUSTING THE PRINTER SETTINGS
or to view other
to enter a submenu,
23