Message Descriptors (Status Lamps) - TEC MA-1350-1 SERIES Owner's Manual

Message Descriptors (Status Lamps)

PC: Illuminates during data communication between the cash register and a personal
computer.
SLIP: Illuminates when a validation slip is properly inserted to allow the validation print. It flickers
to inform that the validation print is required when the validation compulsory status has
been programmed on the last operation.
R OFF: Illuminates when the Receipt-OFF mode is declared by the [LOG/RECEIPT] key. In this
condition, no receipts will be issued for a sale to be entered. To extinguish this lamp (i.e.,
to change into Receipt-ON mode for issuing receipts), simply depress the [LOG/
RECEIPT] key again.
SIGN ON: Illuminates when a cashier signs ON if the cashier signing method has been selected.
ALM: Illuminates with the alarm buzzer to indicate that the last operation or numeric entry was
an error. To clear the error condition, depress the [C] key.
TL: Illuminates with the total amount displayed when a sale is finalized without any amount
tendered.
ST: Illuminates in the following operations or condition.
•
•
•
•
CG: When an amount tendering operation has been performed, this lamp illuminates with the
amount of change due displayed.
The [ST] key is depressed, indicating that the displayed amount is subtotal.
The [TXBL TL] key is depressed, indicating that the displayed amount is taxable
total.
The [EX] key is depressed, indicating that the displayed amount is the sale portion
subject to the tax exemption.
Amount tendered is less than the sale total.
- 6 -
EO1-11126
MA-1350-1 SERIES