Setting Station Run Times - Toro GreenKeeper 212 User Manual

Setting Station Run Times

Turn the control dial to the
position.
Check the
PROGRAMS
reposition the switch to select the desired program.
Station number 1 will be flashing and its current run
time or OFF will be shown. To select a different sta-
tion number, press the +/
desired station number is flashing.
Press the button. The run time (or OFF) will
NEXT
begin flashing.
To set the run time, press the +/
until the desired run time is shown.
Note: To remove the run time, select OFF by press-
ing the +/ and –/
ON OFF
Press the button. The next station number will
NEXT
begin flashing.
7. Repeat steps and
or remove the run time for the remaining stations .
8. To set the station run time for another program,
repeat all of the steps starting at step
Return the control dial to the
STATION TIMES
switch setting. If necessary,
or –/ button until the
ON OFF
or –/ button
ON OFF
buttons at the same time.
as needed to set, change,
.
position.
RUN
2 4
PGM A
9
1 2 3 4 5 6
3
2
1
5
3 5
4 5
3 5
21