Setting an Interval Schedule
Turn the control dial to the
position.
Check the
PROGRAMS
reposition the switch to select the desired program.
The current watering schedule will be displayed. If
Int (Interval) is not displayed, press the +/
–/
button as needed to select Int.
OFF
Press the
NEXT
(1–7) will begin flashing. The day of the week on
which the Interval will start will be shown.
To change the Interval number, press the +/
–/
button until the desired number is flashing.
OFF
Press the
NEXT
begin flashing.
To change the Interval start day, press the +/
button or the –/
flashing.
8. To set an Interval schedule for another program,
repeat all of the steps beginning at step
18
WATERING DAYS
switch setting. If necessary,
button. The current Interval number
button. The Interval start day will
button until the desired day is
OFF
or
ON
or
ON
When you have completed setting the Interval
schedule for each program (as needed) return the
control dial to the
ON
.
3
2
PGM A
3
9
MO
6
7
4
1
position.
RUN
5
3
5 7
4 6
2
3
5 7