Removing A Dvd/Dat Drive; Dvd/Dat Location - HP rp7440 Service Manual

CAUTION:
follow ESD safety precautions could result in damage to the server.
Figure 6-16 DVD/DAT Location
DVD/DAT

Removing a DVD/DAT Drive

1. To remove the DVD/DAT, depress the front locking latch to loosen the drive from the chassis.
2. Partially slide the drive out.
3. Disengage the cables from the rear of the DVD/DAT.
4. Remove the rails and clips from the drive.
5. Completely slide the drive from the chassis.
Observe all ESD safety precautions before attempting this procedure. Failure to
(Figure 6-17).
Removing and Replacing a Half-Height DVD/DAT Drive 157