HP rp8400 Series Installation Manual page 74

System Installation
Configuring the Management Processor for use with a Web Console
Removing Users - Users can be removed or disabled with the security options command.
To remove a user, perform the following:
1. Access the MP.
2. Enter the Security Options and access control (so) command.
3. Select the second menu item then enter "D" for delete.
Return the MP to default configurations - The Default Configuration (dc) command is used to reset
all or some of the MP values to the default values.
To return MP values to default configurations, perform the following:
1. Access the MP.
2. Enter the Default Configuration (dc) command.
3. Follow the prompts for the dc command. Be sure to have the change information available.
CAUTION
The Web console is now configured on the MP.
For instructions on how to connect a Secure Web Console to the Core I/O, go to the following URL:
http://docs.hp.com/
Scroll down and click on System Hardware, then select Secure Web Console.
74
When the security configuration is reset, all users are removed including the MP
administrator. It also disables the remote. The remote must be enabled through the
main console using the enable remote (ER) command.
Chapter 5