Wheel Kit Installation - HP rp7400 Installation Manual

Wheel Kit Installation Guide

Wheel Kit Installation

Wheel Kit Installation
NOTE Wheel kits are available in both dark and light colors.
Compare the packing list with the contents of the wheel kit before beginning the installation.
Table 1-1 Wheel Kit Packing List
Part Number
(Light Color)
A6753-04013 A9903-04001
A6753-04002 A9903-04006
A6753-04003 A9903-04007
A6753-04004 A9903-04008
A6753-00007 A9903-00001
A6753-04001 A9903-04002
A6753-04005 A9903-04003
A6753-04006 A9903-04004
A6753-04007 A9903-04005
0515-2478 0515-2478
A6093-44013 A6093-44013
Not Applicable Not Applicable
Tools Required for Installation
The following list provides the installer with the recommended tools to perform the wheel kit installation.
• Diagonal side cutters
• Safety glasses
• Torx driver with T-15 bit
• Phillips head screwdriver
WARNING Wear protective glasses while cutting the plastic bands around the shipping
container. These bands are under tension. When cut, they can spring back and cause
serious eye injury.
4
Part Number
(Dark Color)
Wheel Kit consisting of the
following components:
Side Cover
Side Cover
Top Cover
Caster Cover
Right Front Caster Assembly
Right Rear Caster Assembly
Left Front Caster Assembly
Left Rear Caster Assembly
M4 x 0.7 8mm T15 Steel Zinc
Machine Screw (Used to attach
each caster to the chassis)
Plywood Unloading Ramp
Phillips Head Wood Screw (Used
to attach the ramp to the pallet)
Description Quantity
1
1
1
1
2
1
1
1
1
4
1
2
Chapter 1