HP rp7400 Installation Manual
Wheel kit installation guide, second edition - hp server rp74xx and rx76xx
Hide thumbs
Also See for rp7400:
- Hardware manual (162 pages) ,
- Manual (82 pages) ,
- Programmer's manual (109 pages)
Advertisement
Quick Links
Download this manual
See also:
Manual
Wheel Kit Installation Guide
HP Server rp74XX and rx76XX
Second Edition
Manufacturing Part Number : A9903-96001
July 2003
Advertisement
Related Manuals for HP rp7400
Summary of Contents for HP rp7400
- Page 1 Wheel Kit Installation Guide HP Server rp74XX and rx76XX Second Edition Manufacturing Part Number : A9903-96001 July 2003...
- Page 2 The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance or use of this material.
- Page 3 Wheel Kit Installation Guide The HP Servers rp74XX and rx76XX can be configured as a standalone server. This is accomplished by using the wheel kit in conjunction with the proper tools to attach the wheel kit to the server before rolling it off of the shipping pallet.
-
Page 4: Wheel Kit Installation
Wheel Kit Installation Guide Wheel Kit Installation Wheel Kit Installation NOTE Wheel kits are available in both dark and light colors. Compare the packing list with the contents of the wheel kit before beginning the installation. Table 1-1 Wheel Kit Packing List Part Number Part Number Description... - Page 5 Wheel Kit Installation Guide Wheel Kit Installation 1. Cut and remove the polystrap bands securing the HP Server to the pallet. 2. Lift the carton top from the cardboard tray resting on the pallet. 3. Remove the Wheel Kit carton and the top cushions from the pallet. Figure 1-1 Component Locations Top Cushions...
- Page 6 Wheel Kit Installation Guide Wheel Kit Installation 5. Carefully tilt the server and place one of the foam blocks (A6093-44002) under the left side of the server. Do not remove any other cushions until instructed to do so. Figure 1-2 Position foam block on left side of server Foam Block Cardboard Tray...
- Page 7 Wheel Kit Installation Guide Wheel Kit Installation 6. Carefully tilt the server and place the other foam block provided in the kit under the right side of the server. Figure 1-3 Position foam block on right side of server Foam Block MWK003 3/11/03...
- Page 8 Wheel Kit Installation Guide Wheel Kit Installation 7. Remove the cushions from the lower front and rear of the server. Do not disturb the side cushions. Figure 1-4 Remove lower front and rear foam blocks MWK004 3/12/03 8. Locate and identify the caster assemblies.Use the following table to identify the casters The caster part number is stamped on the caster mounting plate NOTE Table 1-2...
- Page 9 Wheel Kit Installation Guide Wheel Kit Installation 9. Locate and remove one of the four screws from the plastic pouch. Attach the a caster to the server. Figure 1-5 Attaching a Caster to the Server MWK005 3/12/03 10. Attach the remaining casters to the server using screws supplied in the plastic pouch. 11.
- Page 10 Wheel Kit Installation Guide Wheel Kit Installation 16. Insert the slot on the caster cover into the front caster. Secure the cover to the server by tightening the captive screw on the cover at the rear of the server. Figure 1-6 Securing each Caster Cover to the Server Caster Cover Rear Casters...
- Page 11 Wheel Kit Installation Guide Wheel Kit Installation Top Cover Replacement Figure 1-7 Top Cover Removing the Top Cover Figure 1-8 Top Cover Retaining Screws Step 1. Loosen the retaining screws securing the cover to the rear of the chassis. Chapter 1...
- Page 12 Wheel Kit Installation Guide Wheel Kit Installation Step 2. Slide the cover toward the rear of the chassis. Step 3. Lift the cover up and away from the chassis. Installing the New Top Cover Step 1. Slide the new cover into position. It should easily slide into position; however, a slow firm pressure will be needed to properly seat the cover.
- Page 13 Wheel Kit Installation Guide Wheel Kit Installation Step 2. Slide the cover from the chassis. Figure 1-10 Side Cover Removal Detail Installing a New Side Cover Step 1. Slide the new cover in position. Step 2. The cover easily slides into position; however, a slow firm pressure will be needed to properly seat the cover.
- Page 14 Wheel Kit Installation Guide Wheel Kit Installation Step 3. Tighten the retaining screw securing the cover to the chassis. Figure 1-11 Completed Server MWK007 3/11/03 Chapter 1...