Getting Photos Into The Printer; Inserting A Memory Card - Epson Stylus Photo R300 Series User Manual

Getting Photos into the Printer

Your EPSON Stylus Photo R300 Series printer can print photos stored:
On a memory card (see below)
In a digital camera (see page 20)
On a data storage device, such as a CD-R drive or an Iomega Zip drive (see page 20)
On a Bluetooth-enabled device with the optional Bluetooth Photo Print adapter (see
page 41)
The file storage device should comply with DCF (Design rule for Camera File systems)
Version 1.0.
However your photos are stored, make sure the image files meet these requirements:
JPEG files or uncompressed Tiff files only
Resolutions ranging from 160 × 160 to 4600 × 4600 pixels
No more than 999 images (although you may have additional images on your card or
storage device, the printer can read only the first 999)

Inserting a Memory Card

Your printer works with many types of memory cards. Follow these guidelines to insert your
memory card:
1. Make sure the printer is turned on, then insert the memory card into the appropriate slot,
as shown:
CompactFlash or
Microdrive
2. Close the memory card cover.
Memory Stick,
SD (Secure Digital), or
(left) MMC (MultiMediaCard)
(middle)
Getting Photos into the Printer
SmartMedia or
xD Picture Card
(right)
19