Epson Stylus Photo R300 Series User Manual page 92

7. Lower the cartridge into the holder, with the green circuit board facing the front. Then
gently push the cartridge down until it is firmly seated.
8. If you need to replace another ink cartridge, repeat steps 5 through 7 before continuing
with step 9.
9. Close the cartridge cover.
10. Press the left front corner of the cartridge cover forward to lock the cover into place.
11. Press
OK
The printer begins charging the ink delivery system.
12. When you see a message that charging is complete (after about a minute), press
finish.
92
Maintaining Your Printer
and close the printer cover.
to
OK