Epson Stylus Photo R300 Series User Manual page 76

6. Click
OK
position check disk or CD.
7. Remove the position check disk or CD and measure the distance from the edge of the
hole to the small cross marks (distances labeled A and B as shown). You'll need a metric
ruler with millimeters for these measurements.
8. Open the File menu and select
9. Make sure
Height (Top)
box.
Space
10. Click
OK
76
Printing From Your Computer
(Windows) or (Macintosh). The confirmation pattern is printed on the
Print
Enter measurements here
or
Enter Values Value Entry
or box. Enter the B distance in the
Top Space
to save the measurements to the EPSON Print CD program.
Adjust Print Position
is checked, then input the A distance in the
. You see a screen like this:
Width (Right)
or
Right