Epson Stylus Photo R300 Series User Manual page 99

Display
Close the CD/DVD guide.
The CD/DVD tray is not set correctly. Reload the tray,
then press the maintenance button.
The inserted card cannot be used with this printer.
Bluetooth Photo Print Adapter error. Disconnect the
Adapter from the printer, then reconnect it.
System error. Simultaneously press and hold the Power
and Stop button for 7 seconds to turn off the printer.
Ink icon blinks
Communicating with computer. Please wait.
The connected device cannot be used.
Solution
Close the CD/DVD guide, then
press the ( maintenance
button.
If the CD/DVD tray is inserted,
remove the CD/DVD tray, then
close the CD/DVD guide.
Reload the CD/DVD tray, then
press the ( maintenance
button.
Use a compatible and formatted
memory card. (See page 19.)
Disconnect the adapter, then
reconnect to the printer.
Turn the printer off, and, after a
few seconds, turn it on again. If
the error is not cleared, contact
your dealer.
The printer is low on ink. Obtain
a replacement ink cartridge.
Start printing from the LCD
panel after printing from the
computer is completed.
Connect an external storage
device that is compatible with
the printer. (See page 20.)
Diagnosing Problems
99