Lexmark T620 Service Manual page 60

4069-5XX/7XX
User Message
Primary
282 Staple Jam
Check Stapler
283 Staple Jam
Check Stapler
Insert Cartridge or
Close Door
2-32
Service Manual
User
Message Explanation
Secondary
Remove Job Primary: A staple jam has been
from Finisher detected during normal stapler
operation.
Secondary: The printer flashes the
secondary message to indicate that all
accumulated sheets should be removed
during the jam clearance.
Remove Job Primary: A staple jam has been
from Finisher detected during the priming operation.
Secondary: The printer flashes the
secondary message to indicate that all
accumulated sheets should be removed
during the jam clearance.
Note: The following actions can be taken
while either of the primary or secondary
messages is displayed
1. Press GO to initiate priming and
This message displays when the printer
front door is open or the print cartridge
is missing.
If this message cannot be cleared go to
the
Service Check" on page
resume printing.
"Cover Open Switch/Cable
2-49.