Replacement Parts; Accessories - Superior SDVI Installation And Operation Manual

REPLACEMENT PARTS - MODEL SDVI
Cat. No.
H6033 Cassette Assembly, NG (if LP, also requires H5464
conversion kit)
H6010 Main Burner Assembly
H5922 Pilot Assembly, Convertible NG or LP
H5938 Gas Control Valve, NG (if LP, also requires H5941
regulator kit)
H5939 Regulator, NG
H5941 Regulator, LP
H5965 Orifice, Main Burner, NG #41
H5964 Orifice, Main Burner, LP #53
H6013 Blower w/Mounting Bracket
H5875 Blower Snap Switch
H5655 Blower Speed Control (rheostat)
H5744 On/Off Switch
H6007 On/Off Switch Wires
H5745 Piezo Igniter
H4635 Wall Thermostat, Digital
H5660 Power Cord
H5977 Blower Wire
H5730 Speed Control Wire (for rheostat)
H5869 Log Set
H5863 Bag of Embers (volcanic stone)
H5864 Bag of Rockwool
H5990 Firebox Door w/Glass
H5989 Hardware Package
H5839 Log Set Support
Contact an Authorized Lennox Hearth Products dealer to obtain any of
these parts. Never use substitute materials. Use of non-approved parts
can result in poor performance and safety hazards.
Failure to position the parts in accordance with these
diagrams or failure to use only parts specifically
approved with this appliance may result in property
damage or personal injury.
Risque de dommages ou de blessures si les pièces
ne sont pas installées conformément à ces schémas
et ou si des pièces autres que celles spécifiquement
approuvées avec cet appareil sont utilisées.
24
Description
(ref. form #506033-04)
WARNING
AVERTISSEMENT
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.

ACCESSORIES

Wall
Controls
Thermostat
Cat. No. Model
70005 RT-AC Remote Thermostat AC
(ref. form #775280M)
H0251 RCL-STAT Remote Control, RCL-STAT, Deluxe
Thermostat DC
H4635 DWTK Wall Thermostat, Digital
75273 GASINS-RSCP-B Round Black On/Off Switch Cover Plate
Gas Conversion Kits
H5464 MED-CK-NG to LP
H5465 MED-CK-LP to NG
Touch-Up Paint Kit
70K99 TSPK-B Touch-Up Paint, Metallic Black (12 oz aerosol)
Finish Panels / Front Supports
75264 MED-ZC-SPPT
75251 GFHKET-B
Remote
Control
Description
(ref. form #750129M)
Conversion Kit NG to LP
(ref. form #775246M)
Conversion Kit LP to NG
(ref. form #775237M)
I
"ZC Lower Finish Panel/Trad Face
Support, * Requires Trim Piece below"
(ref. form #775257M)
Extended Side Trim Kit, Black
(ref. form #775208M)