Leaving The Setup Program - Epson Equity LT-286 User Manual

Leaving the Setup Program

When you finish using the setup program, press ? until
highlighted and then press
current setup program settings and a menu:
F 1
Check the list to make sure all the information is correct:
If any setting is incorrect, highlight
l
Enter.
press
correct the setting.
If you did not make any changes or if you want to cancel the
l
changes you made, highlight
then press
appears. Press 0 and then
remove your Reference diskette and insert your working copy of
the Startup/Operating 1 diskette.
Enter.
The main setup menu appears again and you can
Exit without saving
Enter.
The Reference diskette's operation menu
The screen displays a list of the
640 KB
0 K N
80287 not installed
3.0 minutes
Change settings
Enter
to exit to MS-DOS. Then
Running the Setup Program
is
Exit
80 col
and
and
2-13