Mass Storage - Epson Equity LT-286 User Manual

Mass Storage

The setup program assumes that your computer has an internal
1.44MB 3 1/2-inch floppy disk drive, an internal 20MB hard disk,
and that you are not using an external 5 1/4-inch diskette drive. If
this is true, you do not need to make any changes to the Mass
portion of the setup program.
storage
To change the mass storage information recorded by the setup
program or to confirm that the current settings are correct,
highlight
Mass storage
appears:
I
If you are using an external 5 1/4-inch diskette drive, highlight
external diskette drive you have installed. As you continue to press
Enter,
the display cycles through the available options: 360 KB,
1.2 MB, and None. Select the appropriate option for your system.
Your hard disk is most likely a Type 2,20MB disk. If it is not,
highlight Drive c and press
type of drive you have installed. As you continue to press
the display cycles through the available options: Type 3 (40MB),
(40MB) , None, and Type 2 (20MB).
Type 4
appropriate option for your system.
and press
Exit Exit
Memory Memory
Display Display
Coprocessor Coprocessor
Mass storage Mass storage
Backlight period
Gray scale
S
AVE ETTIN
Then press
Enter.
Then press
Running the Setup Program
Enter.
The following display
GS *******
Enter
to select the type of
Enter
Select
>
to select the
Enter,
the
2-7