Table of Contents
Advertisement
If you have modified the gray-scale settings, press F1. The
screen displays the current gray-scale assignments. If you want
to make any changes, highlight
Enter.
The main setup menu appears again, and you can make
any necessary changes.
When the settings are the way you want them, remove the
Reference diskette and insert your working copy of the Startup/
Operating 1 diskette in drive A. Then highlight
Enter.
and press
the new configuration, and MS-DOS is reloaded. After you
using
Enter
press
twice to respond to the date and time prompts, the
prompt reappears on the screen.
If the computer displays a setup error message while it is starting up,
run the setup program again and check all your settings.
2-14
Running the Setup Program
At this point, the program resets the computer
Change settings
EXIT AND SAVE
and press
A>
Advertisement
Table of Contents
