Epson EQUITY 3865X/20 PLUS User Manual page 72

Caution
Do not reset the computer as a means to exit a program.
Some programs classify and store new data when you exit a
program in the normal manner. If you reset the computer
without properly exiting a program, you may lose data.
To reset the computer, MS-DOS must be either on the hard disk
or on a diskette in drive A; so if you do not have a hard disk,
insert the MS-DOS Startup diskette in drive A.
There are two ways to reset the computer:
Del
the
the computer should reload MS-DOS. If it doesn't, try the
next method.
works even when the computer does not respond to your
keyboard entries.
If resetting the computer does not correct the problem, you
probably need to turn it off and reboot it. Remove any
diskette(s) from the diskette drive(s). Turn off the computer
and wait five seconds. If you do not have a hard disk, insert the
MS-DOS Startup diskette in drive A. Then turn on the
computer.
3-6 Using Your Computer
key. The screen goes blank for a moment and then
RESET
button on the front panel. This method
Ctrl
and Alt and press