Epson EQUITY 3865X/20 PLUS User Manual page 218

To start this test, select 2-Destructive Surface
analysis from the Hard Disk Format Menu. You see these
messages:
Analyze Hard Disk
Read/Save/Write/Read/Restore/Read
check for all tracks...
Current cylinder
As the program checks each track, it counts the cylinder
numbers (nnnn) down to zero. When the test is complete, the
program displays a report on the status of the disk, including a
table of unflagged tracks that produced write, read errors-such
as the following:
Analysis finished.
Count of tracks flagged bad
Count of tracks with write, read errors
Count of good tracks
No write, read error was detected.
No data was destroyed.
Press ENTER to return to the menu.
If the program finds one bad track that is not flagged, the
summary would show one track with a write, read error. The
report is followed by a table like this:
Cylinder Head
237 2
Confirm to register the tracks in the Write, Read Error Track
Table as bad
Do you want to register the error
Write, Read Error Tracks
Cylinder Head Cylinder Head
tracks.
Physically Formatting a Hard Disk
<Drive 1:>
is nnnn
Cylinder Head
as
tracks
n
n
=
= n n n n
I
bad tracks? (Y/N)
B-11