Epson EQUITY 3865X/20 PLUS User Manual page 50

Note
If you are using the keyboard that came with your computer
(or another IBM AT compatible keyboard), the default for
the initial num lock setting is ON. If you are using a keyboard
that has 83 or 84 keys, the initial num lock default setting is
OFF.
The keyboard repeat rate option lets you change the speed
which your keyboard repeats a character when you hold down a
key. The default setting is
faster or slower.
Follow these steps to check or change the speaker and keyboard
options:
1.
At the main Setup menu, highlight
The current settings appear:
Speaker
Initial num lock
KB repeat rate
If the displayed settings are appropriate for you, skip this
section.
2.
To change any of the settings, press
moves into the submenu and the
highlighted.
3.
To enable or disable the speaker (turn it on or off), press
Enter.
4.
To turn the initial num lock setting
Initial num lock
Normal,
but you can make the rate
Keyboard/Sound.
Enter.
Speaker
on or
Enter.
and press
Running the Setup Program
at
Enabled
ON
Normal
The cursor block
option is
off, highlight
2-15